Cinegy TS Analyzer is a lightweight tool, which can be useful to
analyze an incoming live stream when you experience RTP skips, for
example. The tool itself and details on its use are available on the
Cinegy github: https://github.com/Cinegy/TsAnalyser
[h...
In order to add new storage that should be used only when specified
explicitly in watch folder settings the following steps should be
performed:
- register network shares that refer to the new storage in Cinegy
Archive;
- create a new Media Group that...
In order to achieve automatic media assets population, you'll need to
use Cinegy Traffic Gateway and Cinegy Convert (either Legacy or PRO).
All the media files that are going to be played out should have a
unique name (Traffic ID). While composing the CS...
GPU offloading (hardware acceleration) is available for Daniel2 4:2:2
formats. Other formats are CPU-based.
Cinegy recommends using the following bitrates for Daniel2 format:
- UHD p50 4:2:0 8 bit: 600 Mbit/sec
- UHD p50 4:2:0 10 bit: 800 Mbit/sec
-...
With the help of GPU we are able to decode H264, HEVC, and MPEG2. H264
NVidia GPU supports only 4:2:0 Chroma Format and 8 Bit Depth while
HEVC NVidia GPU also supports 10 Bit Depth.
The decoder(s)/encoder(s) work either on the CPU, or they are executed
...
It is NOT possible to start the second Cinegy Capture service for same
one-channel card, if the whole card is already initialized and used by
other Cinegy Capture service.
No, capturing directly to the network storage is the standard way to
use Capture with Cinegy Archive.
It also has additional stability protection against the short-term
network disconnection, so there is no need for a local copy when
network conditions ...
XAVC exists only in 10 bit 4:2:2 and has the fixed bitrate about 800
Mbit/sec, it can't be changed by the standard.
Cinegy always aspires to make all products reliable and as much as
possible resistant to the short- and mid-term hardware/network
failures.
In Cinegy Capture we have introduced the file write buffer ("Output
buffer"), which helps to keep real-time captu...
Cinegy Capture supports dual recording to the local disk and to the
external storage. If the machine cannot access the external drive, it
may be related to non-sufficient account permissions due to using the
local system account. This account does not hav...
The name of the file in Capture begins by the date and time + event
(jj-mm-yyyy-event...). But sometimes the date looks like mm-jj-yyyy...
Most possibly that you run Capture services under different user
accounts and the "Region and Location" windows se...
