Knowledgebase
(8)3rd-party integration
(3)Cinegy Traffic Gateway
(4)Cinegy Titler
(4)Cinegy Helpdesk
(5)Cinegy Multiviewer
(18)Cinegy Desktop
Cinegy Type
(2)Cinegy WorkspaŃe
(12)Cinegy Capture
(16)Cinegy Convert
(28)Cinegy Archive
(2)Search
(5)Supported file formats
(11)SDI video cards
(11)Cinegy Licensing
(39)Cinegy Air
There is no .exe file in the installation package. In order to install
the driver do the following:
* First of all stop all the applications or services that may be
using the SDI card.
* Uninstall any previous AJA driver in Device Manager. Make sure...
The Blackmagic VideoHub should be installed. The hardware should be
recognized by Windows OS and Windows should get its IP.
The VideoHub command in Cinegy Air has the following syntax:
Device: BMDVIDEOHUB
Command: crosspoint
Op1: main crosspoint
Op2: re...
BlackMagic design Decklink BMDL Duo2 and Quad2* cards have specific
architecture.
These cards have "4/8 independent 3G-SDI connections". That does not
mean that they have 4/8 independent 3G-SDI full duplex channels, but
just 4/8 connectors which can be co...
Cinegy Playout can be set up to work in the Key&Fill mode allowing to
superimpose titles or graphics over the video source using the video
mixer upstream or downstream keyers. Read more in the "Key&Fill Mode"
section of the "Cinegy Playout Configuration" ...
Cinegy Desktop supports the following SD/HD SDI video cards:
* Blackmagic DeckLink family of cards
* DVS Centaurus II (LT), Atomix LT
In order to enable this functionality, please start Cinegy
Configuration tool (CinegyCfg.exe) and go to the "Desk...
It is NOT possible to start the second Cinegy Capture service for same
one-channel card, if the whole card is already initialized and used by
other Cinegy Capture service.
For example, the typical message in the log is the following:
12.06.2020 14:43:41.792 (5528) DecklinkInput board 2 'DeckLink Duo 2',
supported 16 audio channels
12.06.2020 14:43:41.798 (8904) DecklinkInput board 3 'DeckLink Duo 2',
supported 16 audio ...
DVSconf does not allow to select the sync source when the actually
connected reference feed is not compatible with the chosen option
(auto-detection feature).
To assure proper work with the DVS board, all Cinegy modules such as
Cinegy Ingest, Outgest, etc. should have access to the dvsoem.dll
file. Check the DVS driver package installed on your computer and add
the path to the folder containing the dvsoem.dll f...
Yes, they are supported, as well as all cards from Blackmagic
DeckLink. The driver installation package can be found on the Cinegy
website.
For more details on the supported cards, please refer to the Cinegy
System Recommendations document available on ...
There is some limitation in the DeltaCast driver - by default it
doesn't allow to use the same card for Windows Service (Cinegy
Capture) and Windows Application (Cinegy Air). Deltacast suggests the
following workaround allowing your processes to communica...